UF_NXSM_ask_base_cflange (view source)
Defined in: uf_nxsm.h
Overview
This is to inquire the data for a feature.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
gateway
int UF_NXSM_ask_base_cflange
(
tag_t feature,
UF_NXSM_base_cflange_data_p_t base_cflange_data
)
UF_NXSM_ask_bend (view source)
Defined in: uf_nxsm.h
Overview
This is to inquire the data for NXSM Bend feature.
If a sketch_tag was used to create or edit the bend, a sketch_tag will be returned from this method.
If a section_tag was used to create or edit the bend, a section_tag will be returned from this method.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
gateway
int UF_NXSM_ask_bend
(
tag_t feature,
UF_NXSM_bend_data_p_t bend_data
)
UF_NXSM_ask_closed_corner (view source)
Defined in: uf_nxsm.h
Overview
This is to inquire the data for a closed corner feature.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
gateway
int UF_NXSM_ask_closed_corner
(
tag_t feature,
UF_NXSM_closed_corner_data_p_t clcorner_data
)
UF_NXSM_ask_flange (view source)
Defined in: uf_nxsm.h
Overview
This is to inquire the data for a flange feature.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
gateway
int UF_NXSM_ask_flange
(
tag_t feature,
UF_NXSM_flange_data_p_t flange_data,
UF_NXSM_flange_sketch_data_p_t sketch_data
)
UF_NXSM_ask_flat_solid (view source)
Defined in: uf_nxsm.h
Overview
This is to inquire the data for a flatten feature.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
gateway
int UF_NXSM_ask_flat_solid
(
tag_t feature,
UF_NXSM_flat_solid_data_p_t flat_solid_data
)
UF_NXSM_ask_jog (view source)
Defined in: uf_nxsm.h
Overview
This is to inquire the data for a jog feature.
If a sketch_tag was used to create or edit the jog, a sketch_tag will be returned from this method.
If a section_tag was used to create or edit the jog, a section_tag will be returned from this method.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
gateway
int UF_NXSM_ask_jog
(
tag_t feature,
UF_NXSM_jog_data_p_t jog_data
)
UF_NXSM_ask_rebend (view source)
Defined in: uf_nxsm.h
Overview
This is to inquire the data for a rebend feature.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
gateway
int UF_NXSM_ask_rebend
(
tag_t feature,
UF_NXSM_rebend_data_p_t rebend_data
)
UF_NXSM_ask_sec_cflange (view source)
Defined in: uf_nxsm.h
Overview
This is to inquire the data for a Secondary Contour Flange feature.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
gateway
int UF_NXSM_ask_sec_cflange
(
tag_t feature,
UF_NXSM_sec_cflange_data_p_t sec_cflange_data
)
| tag_t | feature | Input | secondary contour flange feature to be asked |
| UF_NXSM_sec_cflange_data_p_t | sec_cflange_data | Output to be freed | Data for the secondary contour flange feature. |
UF_NXSM_ask_sec_tab (view source)
Defined in: uf_nxsm.h
Overview
This is to inquire the data for a secondary tab feature.
If a sketch_tag to create or edit the secondary tab, a sketch_tag will be returned from this method.
If a section_tag to create or edit the secondary tab, a section_tag will be returned from this method.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
gateway
int UF_NXSM_ask_sec_tab
(
tag_t feature,
UF_NXSM_sec_tab_data_p_t sec_tab_data
)
UF_NXSM_ask_tab (view source)
Defined in: uf_nxsm.h
Overview
This is to inquire the data for a tab feature.
If a sketch_tag was used to create or edit the base tab, a sketch_tag will be returned from this method.
If a section_tag was used to create or edit the base tab, a section_tag will be returned from this method.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
gateway
int UF_NXSM_ask_tab
(
tag_t feature,
UF_NXSM_tab_data_p_t tab_data
)
UF_NXSM_ask_unbend (view source)
Defined in: uf_nxsm.h
Overview
This is to inquire the data for a unbend feature.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
gateway
int UF_NXSM_ask_unbend
(
tag_t feature,
UF_NXSM_unbend_data_p_t unbend_data
)
UF_NXSM_create_base_cflange (view source)
Defined in: uf_nxsm.h
Overview
This is to create an NXSM base contour flange feature based on the input data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_create_base_cflange
(
UF_NXSM_base_cflange_data_p_t base_cflange_data,
tag_t * * features
)
| UF_NXSM_base_cflange_data_p_t | base_cflange_data | Input | Input data to be used to create a base contour flange feature. |
| tag_t * * | features | Output to be freed | List of feature identifiers created. This
must be freed by caller. |
UF_NXSM_create_bend (view source)
Defined in: uf_nxsm.h
Overview
This is to create an NXSM bend feature based on the input data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_create_bend
(
UF_NXSM_bend_data_p_t bend_data,
tag_t * * features
)
| UF_NXSM_bend_data_p_t | bend_data | Input | Input data to be used to create a bend feature. |
| tag_t * * | features | Output to be freed | List of feature identifiers created. This
must be freed by caller. |
UF_NXSM_create_closed_corner (view source)
Defined in: uf_nxsm.h
Overview
This is to create an NXSM closed corner feature based on the input data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_create_closed_corner
(
UF_NXSM_closed_corner_data_p_t clcorner_data,
tag_t * * features
)
| UF_NXSM_closed_corner_data_p_t | clcorner_data | Input | Input data to be used to create a clcorner feature. |
| tag_t * * | features | Output to be freed | List of feature identifiers created. This
must be freed by caller. |
UF_NXSM_create_flange (view source)
Defined in: uf_nxsm.h
Overview
This is to create an NXSM flange feature based on the input data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_create_flange
(
UF_NXSM_flange_data_p_t flange_data,
UF_NXSM_flange_sketch_data_p_t sketch_data,
tag_t * * features
)
UF_NXSM_create_flat_solid (view source)
Defined in: uf_nxsm.h
Overview
This is to create a SBSM flatten feature based on the input data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_create_flat_solid
(
UF_NXSM_flat_solid_data_p_t flat_solid_data,
tag_t * * features
)
| UF_NXSM_flat_solid_data_p_t | flat_solid_data | Input | Input data to be used to create a flatten feature. |
| tag_t * * | features | Output to be freed | List of feature identifiers created. This
must be freed by caller.
Use SM_free( ) to free the features |
UF_NXSM_create_jog (view source)
Defined in: uf_nxsm.h
Overview
This is to create a SBSM jog feature based on the input data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_create_jog
(
UF_NXSM_jog_data_p_t jog_data,
tag_t * * features
)
| UF_NXSM_jog_data_p_t | jog_data | Input | Input data to be used to create a jog feature. |
| tag_t * * | features | Output to be freed | List of feature identifiers created. This
must be freed by caller.
Use SM_free( ) to free the features |
UF_NXSM_create_rebend (view source)
Defined in: uf_nxsm.h
Overview
This is to create an NXSM rebend feature based on the input data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_create_rebend
(
UF_NXSM_rebend_data_p_t rebend_data,
tag_t * * features
)
| UF_NXSM_rebend_data_p_t | rebend_data | Input | Input data to be used to create a rebend feature. |
| tag_t * * | features | Output to be freed | List of feature identifiers created. This
must be freed by caller. |
UF_NXSM_create_sec_cflange (view source)
Defined in: uf_nxsm.h
Overview
This is to create an NXSM secondary contour flange feature based on the input data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_create_sec_cflange
(
UF_NXSM_sec_cflange_data_p_t sec_cflange_data,
tag_t * * features
)
| UF_NXSM_sec_cflange_data_p_t | sec_cflange_data | Input | Input data to be used to create a secondary contour flange feature. |
| tag_t * * | features | Output to be freed | List of feature identifiers created. This
must be freed by caller. |
UF_NXSM_create_sec_tab (view source)
Defined in: uf_nxsm.h
Overview
This is to create an NXSM Secondary Tab feature based on the input data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_create_sec_tab
(
UF_NXSM_sec_tab_data_p_t sec_tab_data,
tag_t * * features
)
| UF_NXSM_sec_tab_data_p_t | sec_tab_data | Input | Input data to be used to create a secondary tab feature. |
| tag_t * * | features | Output to be freed | List of feature identifiers created. This
must be freed by caller. |
UF_NXSM_create_tab (view source)
Defined in: uf_nxsm.h
Overview
This is to create an NXSM Tab feature based on the input data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_create_tab
(
UF_NXSM_tab_data_p_t tab_data,
tag_t * * features
)
| UF_NXSM_tab_data_p_t | tab_data | Input | Input data to be used to create a tab feature. |
| tag_t * * | features | Output to be freed | List of feature identifiers created. This
must be freed by caller. |
UF_NXSM_create_unbend (view source)
Defined in: uf_nxsm.h
Overview
This is to create an NXSM unbend feature based on the input data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_create_unbend
(
UF_NXSM_unbend_data_p_t unbend_data,
tag_t * * features
)
| UF_NXSM_unbend_data_p_t | unbend_data | Input | Input data to be used to create a unbend feature. |
| tag_t * * | features | Output to be freed | List of feature identifiers created. This
must be freed by caller. |
UF_NXSM_edit_base_cflange (view source)
Defined in: uf_nxsm.h
Overview
This is to edit a base contour flange feature with given data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_edit_base_cflange
(
tag_t feature,
UF_NXSM_base_cflange_data_p_t base_cflange_data
)
UF_NXSM_edit_bend (view source)
Defined in: uf_nxsm.h
Overview
This is to edit an NXSM bend feature with given data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_edit_bend
(
tag_t feature,
UF_NXSM_bend_data_p_t bend_data
)
UF_NXSM_edit_closed_corner (view source)
Defined in: uf_nxsm.h
Overview
This is to edit a closed corner feature with given data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_edit_closed_corner
(
tag_t feature,
UF_NXSM_closed_corner_data_p_t clcorner_data
)
UF_NXSM_edit_flange (view source)
Defined in: uf_nxsm.h
Overview
This is to edit a flange feature with given data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_edit_flange
(
tag_t feature,
UF_NXSM_flange_data_p_t flange_data,
UF_NXSM_flange_sketch_data_p_t sketch_data
)
UF_NXSM_edit_flat_solid (view source)
Defined in: uf_nxsm.h
Overview
This is to edit a Flatten feature with given data.
On Success returns 0.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_edit_flat_solid
(
tag_t features,
UF_NXSM_flat_solid_data_p_t get_flat_solid_data
)
UF_NXSM_edit_jog (view source)
Defined in: uf_nxsm.h
Overview
This is to edit a jog feature with given data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_edit_jog
(
tag_t feature,
UF_NXSM_jog_data_p_t jog_data
)
UF_NXSM_edit_rebend (view source)
Defined in: uf_nxsm.h
Overview
This is to edit a rebend feature with given data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_edit_rebend
(
tag_t feature,
UF_NXSM_rebend_data_p_t rebend_data
)
UF_NXSM_edit_sec_cflange (view source)
Defined in: uf_nxsm.h
Overview
This is to edit a secondary contour flange feature with given data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_edit_sec_cflange
(
tag_t feature,
UF_NXSM_sec_cflange_data_p_t sec_cflange_data
)
UF_NXSM_edit_sec_tab (view source)
Defined in: uf_nxsm.h
Overview
This is to edit a secondary tab feature with given data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_edit_sec_tab
(
tag_t feature,
UF_NXSM_sec_tab_data_p_t sec_tab_data
)
UF_NXSM_edit_tab (view source)
Defined in: uf_nxsm.h
Overview
This is to edit a tab feature with given data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_edit_tab
(
tag_t feature,
UF_NXSM_tab_data_p_t tab_data
)
UF_NXSM_edit_unbend (view source)
Defined in: uf_nxsm.h
Overview
This is to edit a unbend feature with given data.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_edit_unbend
(
tag_t feature,
UF_NXSM_unbend_data_p_t unbend_data
)
UF_NXSM_free_closed_corner_data (view source)
Defined in: uf_nxsm.h
Overview
This is to free the data structure for closed corner feature.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_free_closed_corner_data
(
UF_NXSM_closed_corner_data_p_t clcorner_data
)
UF_NXSM_free_flange_data (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for flange feature returned by the query method.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_free_flange_data
(
UF_NXSM_flange_data_p_t flange_data
)
UF_NXSM_free_flange_sketch_data (view source)
Defined in: uf_nxsm.h
Overview
This is to free the data structure for the sketch returned by the query method.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_free_flange_sketch_data
(
UF_NXSM_flange_sketch_data_p_t sketch_data
)
UF_NXSM_free_rebend_data (view source)
Defined in: uf_nxsm.h
Overview
This is to free the data structure for rebend feature.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_free_rebend_data
(
UF_NXSM_rebend_data_p_t rebend_data
)
UF_NXSM_free_unbend_data (view source)
Defined in: uf_nxsm.h
Overview
This is to free the data structure for unbend feature.
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_free_unbend_data
(
UF_NXSM_unbend_data_p_t unbend_data
)
UF_NXSM_get_qualified_corner_edge (view source)
Defined in: uf_nxsm.h
Overview
This is used to get a corner edge given its associated bend faces.
History
New in NX5.0
Required License(s)
gateway
int UF_NXSM_get_qualified_corner_edge
(
tag_t bend_face1,
tag_t bend_face2,
logical is_3flange_feature,
tag_t* corner_edge
)
| tag_t | bend_face1 | Input | Bend face adjacent to a corner edge |
| tag_t | bend_face2 | Input | Another bend face adjacent to a corner edge |
| logical | is_3flange_feature | Input | True if the corner is of 3 bend |
| tag_t* | corner_edge | Output | Corner edge of the associated bend faces |
UF_NXSM_init_base_cflange_data (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for base contour flange feature with the
following default values and options.
sketch_section NULL_TAG
thickness 0.00
thickness_side IG_LEFT
projection_dist 0.1/3.0 [in/mm]
projection_side IG_LEFT
extent_type IG_FINITE
bend_parm_type IG_NFTYPE
mitre_data.mitre_position IG_NONE
mitre_data.mitre_type_at_start IG_MITRE_NORMAL_TO_THICKNESS
mitre_data.mitre_type_at_end IG_MITRE_NORMAL_TO_THICKNESS
mitre_data.mitre_side_at_start IG_INSIDE
mitre_data.mitre_side_at_end IG_INSIDE
mitre_data.mitre_by_dist_or_angle_at_start IG_MITRE_BY_ANGLE
mitre_data.mitre_by_dist_or_angle_at_start IG_MITRE_BY_ANGLE
mitre_data.mitre_angle_at_start -45.0
mitre_data.mitre_angle_at_end -45.0
mitre_data.mitre_cut_type IG_MITRE_REGULAR_CUT
mitre_data.close_corner_type IG_CLOSE_CORNER_NONE
mitre_data.close_corner_dia 0.00
bend_options.bend_radius 3.0 / 0.1 [mm/in]
bend_options.is_bend_radius_global TRUE
bend_options.bend_relief FALSE
bend_options.extend_bend_relief FALSE
bend_options.bend_relief_type IG_RECTANGULAR_BEND_RELIEF
bend_options.bend_relief_depth 3.0 / 0.1 [mm/in]
bend_options.bend_relief_depth_global TRUE
bend_options.bend_relief_width 3.0 / 0.1 [mm/in]
bend_options.bend_relief_width_global TRUE
bend_options.corner_relief FALSE
bend_options.corner_relief_type IG_RIP_CORNER_RELIEF
bend_options.neutral_factor 0.33333
bend_options.neutral_factor_global TRUE
is_global_thickness 1
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_init_base_cflange_data
(
UF_NXSM_base_cflange_data_p_t base_cflange_data
)
UF_NXSM_init_bend_data (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for bend feature with the following
default values and options.
sketch_section NULL_TAG
bend_angle 90 degrees.
bend_dir IG_NORMAL_SIDEDUMMY
fixed_side IG_LEFT
material_side IG_RIGHT
extend_option IG_EXTEND
bend_options.bend_radius 3.0 / 0.1 [mm/in]
bend_options.is_bend_radius_global TRUE
bend_options.bend_relief FALSE
bend_options.extend_bend_relief FALSE
bend_options.bend_relief_type IG_RECTANGULAR_BEND_RELIEF
bend_options.bend_relief_depth 3.0 / 0.1 [mm/in]
bend_options.bend_relief_depth_global TRUE
bend_options.bend_relief_width 3.0 / 0.1 [mm/in]
bend_options.bend_relief_width_global TRUE
bend_options.corner_relief FALSE
bend_options.corner_relief_type IG_RIP_CORNER_RELIEF
bend_options.neutral_factor TRUE
bend_options.neutral_factor_global 0.3333333
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_init_bend_data
(
UF_NXSM_bend_data_p_t bend_data
)
UF_NXSM_init_closed_corner_data (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for closed corner feature with the
following default values and options.
n_edges = 0;
parent_edges = NULL;
treatment_type = IG_TREATMENT_OFF;
closure_type = IG_CLOSE_CORNER_NONE;
treatment_dia = 0.0;
overlap_ratio = 0.0;
corner_gap = 0.0;
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_init_closed_corner_data
(
UF_NXSM_closed_corner_data_p_t clcorner_data
)
UF_NXSM_init_flange_data (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for flange feature with the
following default values and options.
parent_edge = NULL_TAG;
sketch_tag = NULL_TAG;
br_type = IG_RECTANGULAR_BEND_RELIEF;
cr_type = IG_RIP_CORNER_RELIEF;
off_type = IG_NONE;
material_side = IG_LEFT;
bend_rad = "0.1";
br_width = "0.1";
br_length = "0.1";
off_val = "0.01";
n_factor = "0.33";
angle = "0.0";
extend_bend_relief = false;
use_global_radius_value = false;
use_global_br_width_value = false;
use_global_br_length_value = false;
use_global_nfactor_value = false;
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_init_flange_data
(
UF_NXSM_flange_data_p_t flange_data
)
UF_NXSM_init_flange_sketch_data (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for the sketch to be used for flange feature with the
following default values and options.
at_start_point = false;
dim_option = IG_OUTSIDE_DIMENSION;
width_option = FULL_WIDTH_TYPE;
prev_width_option = OPTION_NOT_SET;
length = "0.0";
width = "0.0";
dist_from_end = "0.0";
dist_from_left_end = "0.0";
dist_from_right_end = "0.0";
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_init_flange_sketch_data
(
UF_NXSM_flange_sketch_data_p_t sketch_data
)
UF_NXSM_init_flat_solid (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for flatten feature with the
following default values and options.
face_tag NULL_TAG
edge_tag NULL_TAG
is_start_vertex 0
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_init_flat_solid
(
UF_NXSM_flat_solid_data_p_t flat_solid_data
)
UF_NXSM_init_jog (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for jog feature with the following
default values and options.
sketch_tag NULL_TAG
offset_dist 25.4/1.00 [mm/in]
offset_type IG_OFFSET
fixed_side IG_LEFT
material_side IG_INSIDE
extend_option IG_EXTEND
bend_options.bend_radius 3.0 / 0.1 [mm/in]
bend_options.is_bend_radius_global TRUE
bend_options.bend_relief FALSE
bend_options.extend_bend_relief FALSE
bend_options.bend_relief_type IG_RIP_BEND_RELIEF
bend_options.bend_relief_depth 3.0 / 0.1 [mm/in]
bend_options.bend_relief_depth_global TRUE
bend_options.bend_relief_width 3.0 / 0.1 [mm/in]
bend_options.bend_relief_width_global TRUE
bend_options.corner_relief FALSE
bend_options.corner_relief_type IG_RIP_CORNER_RELIEF
bend_options.neutral_factor TRUE
bend_options.neutral_factor_global 0.3333333
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_init_jog
(
UF_NXSM_jog_data_p_t jog_data
)
UF_NXSM_init_rebend_data (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for base rebend feature with the
following default values and options.
tag_t face_collector = NUL_TAG;
int nbend = 0;
tag_t unbend_list = NULL;
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_init_rebend_data
(
UF_NXSM_rebend_data_p_t rebend_data
)
UF_NXSM_init_sec_cflange_data (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for secondary contour flange feature with the
following default values and options.
sketch_section NULL_TAG
ref_edge NULL_TAG
section_edges NULL
profile_ref_end IG_INSIDE
projection_dist 25.4 / 1.0 [mm/in]
projection_side IG_LEFT
extent_type IG_FINITE
bend_parm_type IG_NFTYPE
mitre_data.mitre_position IG_NONE
mitre_data.mitre_type_at_start IG_MITRE_NORMAL_TO_THICKNESS
mitre_data.mitre_type_at_end IG_MITRE_NORMAL_TO_THICKNESS
mitre_data.mitre_side_at_start IG_INSIDE
mitre_data.mitre_side_at_end IG_INSIDE
mitre_data.mitre_by_dist_or_angle_at_start IG_MITRE_BY_ANGLE
mitre_data.mitre_by_dist_or_angle_at_start IG_MITRE_BY_ANGLE
mitre_data.mitre_angle_at_start -45.0 degrees
mitre_data.mitre_angle_at_end -45.0 degrees
mitre_data.mitre_cut_type IG_MITRE_REGULAR_CUT
mitre_data.close_corner_type IG_CLOSE_CORNER_NONE
mitre_data.close_corner_dia 0.00 [mm/in]
bend_options.bend_radius 3.0 / 0.1 [mm/in]
bend_options.is_bend_radius_global TRUE
bend_options.bend_relief FALSE
bend_options.extend_bend_relief FALSE
bend_options.bend_relief_type IG_RECTANGULAR_BEND_RELIEF
bend_options.bend_relief_depth 3.0 / 0.1 [mm/in]
bend_options.bend_relief_depth_global TRUE
bend_options.bend_relief_width 3.0 / 0.1 [mm/in]
bend_options.bend_relief_width_global TRUE
bend_options.corner_relief FALSE
bend_options.corner_relief_type IG_RIP_CORNER_RELIEF
bend_options.neutral_factor 0.33333
bend_options.neutral_factor_global TRUE
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_init_sec_cflange_data
(
UF_NXSM_sec_cflange_data_p_t sec_cflange_data
)
UF_NXSM_init_sec_tab_data (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for secondary tab feature with the
following default values and options.
sketch_profile NULL_TAG
placement_face NULL_TAG
material_side IG_LEFT
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_init_sec_tab_data
(
UF_NXSM_sec_tab_data_p_t tab_data
)
UF_NXSM_init_tab_data (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for base tab feature with the
following default values and options.
sketch_obj NULL_TAG
sweep_dist 0.1/3.0 [in/mm]
sweep_direction[3] { 0.0,0.0,0.0 }
is_global_thickness 1
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_init_tab_data
(
UF_NXSM_tab_data_p_t tab_data
)
UF_NXSM_init_unbend_data (view source)
Defined in: uf_nxsm.h
Overview
This is to initialize the data structure for base unbend feature with the
following default values and options.
tag_t face_collector = NULL_TAG;
tag_t ref_entity = NULL_TAG;
int nbend = 0;
tag_t bend_list = NULL;
tag_t body = NULL_TAG;
Environment
Internal and External
See Also
History
New in NX3.0
Required License(s)
nx_sheet_metal
int UF_NXSM_init_unbend_data
(
UF_NXSM_unbend_data_p_t unbend_data
)