CAM exit dpud

This cam exit will be invoked when creating/editing a CAM User-Defined
Drive Path in an interactive NX session.

The "char param" argument must be converted to a CAM exit id by
type casting. For example, the following line of code performs the
conversion:
UF_CAM_exit_id_t exit_id = (UF_CAM_exit_id_t)param;

Return Code/Description

-1 User Exit Error

0 Successful User Exit execution

Internal

CAM exit udop

This cam exit will be invoked when creating/editing a CAM User-Defined
Operation in an interactive NX session.

The "char param" argument must be converted to a CAM exit id by
type casting. For example, the following line of code performs the
conversion:
UF_CAM_exit_id_t exit_id = (UF_CAM_exit_id_t)param;

Return Code/Description

-1 User Exit Error

0 Successful User Exit execution

Internal

2D Analysis Using Curves

The 2D analysis using curve user exit occurs after the
Info->Analysis...->Area Properties - Using Curves menu. This user exit
bypasses the curve analysis routine and substitutes your user exit
program. There are no return codes associated with this exit.

Internal

CAM Startup

The CAM startup user exit occurs after the Application->Manufacturing...
menu.

Return Code/Description
-1 User Exit Error, abort and return to Gateway

0 Successful User Exit execution, proceed normally.

Internal

Create Component

The create component user exit occurs after the
Assemblies->Components->Create New Component->Add Object Methods menu
and before the select part dialog.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Cancel current assembly operation

2 Select Part dialog with the string (from param) as the default.
Note: The full pathname must be specified in the param argument
in order for this to work.

3 Reserved for future use

n Select Part dialog with no default string. "n" is any other return
code except 1, 2 or 3.

Internal

Change Displayed Part

The change displayed part user exit occurs before the displayed part is about to
be changed explicitly from any user interface entry point, e.g. from the Windows main menu.

It is not possible to provide a default name for the operation.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Cancel current assembly operation

3 Reserved for future use

n Select Part dialog with no default string. "n" is any other return
code except 1 or 3.

Internal

CLF Generate

The CLF Generate exit occurs after Application->Manufacturing->Toolbox->
Tool Path...->Postprocess->Generate CLF. Selecting this option executes
the USER_CL_GEN (CLF generation) exit.

You can pass the CLF name through the param argument.

If no User Function program error is returned and no active part exists,
the File Main menu displays.

If an active part exists, the next interactive step is determined by the
return code as follows:

Return Code/Description

-1 User Exit Error

0 User Exit does not exist.

1 Successful User Exit execution

Internal

CLSF Open

The CLSF open user exit occurs after the Application->Manufacturing...
menu.


If an active part exists, the next interactive step is determined by the
return code as follows:

Return Code/Description

0 No CLSF returned

1 CLSF returned, awaiting acceptance

2 CLSF returned and accepted. Select File dialog with the string (from
param) as the default.

Internal

CLSF Rename

The CLSF rename exit occurs after
Application->Manufacturing->File->Save->CLSF As. Selecting this option
executes both the USER_CLS_RENAME and USER_CLS_SAVE exits in
succession.

You can pass the CLSF name through the param argument.

If no User Function program error is returned and no active part exists,
the File Main menu displays.

If an active part exists, the next interactive step is determined by the
return code as follows:

Return Code/Description

-1 User Exit Error

0 User Exit does not exist.

1 Successful User Exit execution

Internal

CLSF Save

The CLSF save exit is activated by any of the following actions:

1. File->Save->CLSF

2. File->Save->CLSF As You use this exit in succession with the
USER_CLS_RENAME exit.

3. Tool Path Acceptance: Preferences->Autofile CLSF
Toolbox->Operation->Generate->OK

You can pass the CLSF name through the param argument.

If no User Function program error is returned and no active part exists,
the File Main menu displays.

If an active part exists, the next interactive step is determined by the
return code as follows:

Return Code/Description

-1 User Exit Error

0 User Exit does not exist.

1 Successful User Exit execution

Internal

New Part

The new part user exit is invoked after the File->New menu.

If no User Function program error is returned and an active part exists,
control is returned to the current module.

If no active part exists, the next interactive step is determined by the
return code as follows:

Return Code/Description

1 Gateway menu

2 Choose part name file selection dialog with the string (from param)
as the default.

Internal

Change Work Part

The change work part user exit occurs after the Assemblies->Context Control->Set Work Part
before a Component is chosen or when the work part is about to be changed from any other
explicit user interface entry point

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Cancel current assembly operation

2 Select Component dialog with the string (from param) as the default.

3 Reserved for future use

n Normal operation with no default strings. "n" is any other return
code except 1, 2 or 3.

Internal

Remove Component

The remove component user exit occurs after Edit->Delete after a component
has been selected.
It is not called after a Cut operation.

It is not possible to provide a default name for the operation.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Cancel current assembly operation

3 Reserved for future use

n Normal operation with no default strings. "n" is any other return
code except 1 or 3.

Internal

Export Part

The export part user exit occurs after the File->Export->Part menu.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Cancel current assembly operation

2 If the user opts to specify part from the Export Part menu, the value returned
in param will be used for the default part name.

3 Reserved for future use

n Normal operation with no default strings. "n" is any other return
code except 1, 2 or 3.

Internal

SMD exit uffpud

This exit will be invoked when creating or updating a sheet metal
flat pattern.

The "char param" argument must be converted from character string
to tag_t (integer) form. For example, the following code performs the
conversion:
tag_t fp_group_id;
sscanf(param,"%d", &fp_group_tag);

Return Code/Description

-1 User Exit Error

0 Successful User Exit execution

Internal

Access Genius System

This exit accesses the Genius Library Management System. Genius is an
external EDS product used by the Manufacturing Module for Tool Data
Management. The Genius exit occurs after
Application->Manufacturing->Toolbox->Tool->Genius. There are no return
codes associated with this exit.

Internal

Open Part

The open part (retrieve) user exit is invoked after the File->Open menu.

If no User Function program error is returned and an active part exists,
control is returned to the current module.

If no active part exists, the next interactive step is determined by the
return code as follows:

Return Code/Description

1 Gateway menu

2 Choose part name file selection dialog with the string (from param)
as the default.

Internal

Execute GRIP

The execute GRIP user exit occurs after the File->Execute->GRIP menu.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Runs the GRIP program using the string passed from param. The Motif
file dialog is not displayed

2 Disables the Execute GRIP option. The system adminstrator has the
option of making this option (and the use of a GRIP license)
unavailable.

Internal

Debug GRIP

The execute Debug GRIP user exit occurs after the File->Execute->Debug
GRIP menu.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Runs the Debug GRIP program using the string passed from param. The
Motif file dialog is not displayed.

2 Disables the Execute Debug GRIP option. The system adminstrator has
the option of making this option (and the use of a GRIP license)
unavailable.

Internal

Reposition Component

The reposition component user exit occurs after the Assemblies->Components->Reposition Component
menu and after the component has been selected or when a component is about to be
repositioned from any other explicit user interface entry point.

It is not possible to provide a default name for the operation.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Cancel current assembly operation

3 Reserved for future use

n Normal operation with no default strings. "n" is any other return
code except 1 or 3.

Internal

Import Part

The import (merge) part user exit occurs after the File->Import->Part
menu.

If an active part exists, the next interactive step is determined by the
return code as follows:

Return Code/Description

0 Import Part dialog

2 Import Part dialog with the string (from param) as the default filename
This filename will be used when the file selection box is brought up
after leaving the Import Part dialog.

Internal

Rename Component

The rename component user exit occurs after the Component Name
has been changed on the Parameters tab on the Component Properties
dialog and the user has pushed either OK or Apply.

It is not possible to provide a default name for the operation.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Cancel current assembly operation

3 Reserved for future use

n Normal operation with no default strings. "n" is any other return
code except 1 or 3.

Internal

CAM New Operation:

User Function

(1) The 'new operation' exit occurs after
- Application->Manufacturing
- Select the desired Operation Template Type and SubType,
- press 'NEW' button.
The user exit number for new operation creation is 15.
OR
(2) The operation re-initialization from an Operation Template
user exit occurs after
- Application->Manufacturing
- Select existing operation(s) to be re-initialized
- press 'REINIT' button.
The user exit number for operation re-initialization is 67.

Selecting either of the above actions executes the USER_CREATE_OPER
user exit.

The user's GRIP program will use &UENUM to retrieve the user exit number.
Based on the user exit number returned by &UENUM, the user program will
know if this exit is currently invoked by new operation creation or
existing operation re-initialization.

The name of the operation is passed through the oper_name argument.
In GRIP, the user can use &UESTR to retrieve the operation name.
Use &UEXERR to set the return code upon exit from a GRIP program.
If there are more than one operation selected for re-initialization,
the user exit will be called once for each operation to be re-initialized.

Return Code/Description

-1 User Exit Error, abort operation action and return to CAM Operation
Manager dialog

0 Successful User Exit execution, proceed normally.

1 Successful User Exit execution, return to CAM Operation Manager dialog.

Internal

Plot File

The plot file user exit occurs at File->Plot... menu. There is no input
or output exit string.

If an active part exists, the next interactive step is determined by the
return code as follows:

Return Code/Description

1 Gateway menu

n Plot dialog. "n" is any other code except 1.

Internal

CLSF Postprocess
The CLSF postprocess exit occurs after
Application->Manufacturing->Toolbox-> Tool
Path...->Postprocess->Postprocess. Selecting this option executes both
the USER_CL_GEN (CLF generation) and USER_POST (CLSF postprocessing)
exits in succession.

You can pass the CLSF name through the param argument.

If no User Function program error is returned and no active part exists,
the File Main menu displays.

If an active part exists, the next interactive step is determined by the
return code as follows:

Return Code/Description

-1 User Exit Error

0 User Exit does not exist.

1 Successful User Exit execution

Internal

Save Part

The save part user exit occurs after the File->Save menu.

If no User Function program error occurs and an active part exists, the
next interactive step is to continue with the last main menu (Gateway
menu).

Return Code/Description

0 NX should go ahead and file the part
1 Gateway menu, user exit filed the part

Internal

Add Existing Part

The add existing part (retrieve component) user exit occurs after the
Assemblies->Components->Add Existing menu and before the select part dialog.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Cancel current assembly operation

2 Select Part dialog with the string (from param) as the default provided the
part exists so that it can be loaded.

3 Component Parameters dialog with the part (from param) as the part to be added
provided the part exists so it can be loaded.

n Normal operation with no default strings. "n" is any other return
code except 1, 2 or 3.

Internal

Replace Reference Set

The replace reference set user exit occurs after the Format->Reference Sets
dialog has been invoked and the "Set Current" button has been pushed or when
the Reference Set is about to be changed from any other explicit user
interface entry point.

It is not possible to provide a default name for the operation.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Cancel current assembly operation

3 Reserved for future use

n Normal operation with no default strings. "n" is any other return
code except 1 or 3.

Internal

Substitute Component In

The substitute component in user exit occurs after the Assemblies->Components->Substitute Component
menu. It is called before the component that is to be substituted in is selected.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Cancel current assembly operation

2 Select Components dialog with the string (from param) as the
default.

3 Substitute component parameters menu with the part (from param) in case of the
Open As function.
In case of the Substitute function it will behave as return code 1.

n Normal operation with no default strings. "n" is any other return
code except 1,2 or 3.

Internal

Substitute Component Out

The substitute component out user exit occurs after the Assemblies->Components->Substitute Component
menu and after the component has been selected or when a component is about to be substituted
out from any other explicit user interface entry point.

It is not possible to provide a default name for the operation.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Cancel current assembly operation

3 Reserved for future use

n Normal operation with no default strings. "n" is any other return
code except 1 or 3.

Internal

Close Spreadsheet

The close spreadsheet user exit occurs when you exit the spreadsheet
and return control to NX. You must be in the modeling
application and you must be using a full licensed version of the
spreadsheet. This event occurs interactively when a spreadsheet is
active by selecting either File->Exit or Connections->Disconnect from
the spreadsheet menubar. Return codes are ignored with this exit.
In order to use the full licensed version of the Xess spreadsheet along with
the integrated NX/XESS customized applications, you must do the following
prior to invoking NX:
1) Set the UGII_SPREADSHEET variable in the .ugii_env file to point to the
directory which includes the 'xess4' binary executable.
2) Set the environment variable, XESS_FULL, to anything (e.g. setenv XESS_FULL 1).

Internal

Open Spreadsheet

The open spreadsheet user exit occurs when you activate the spreadsheet
from NX. You must be in the modeling or gateway application with
an active part and you must be using a full licensed version of the
spreadsheet. This event occurs interactively when a spreadsheet is
activated by selecting Toolbox->Spreadsheet from menubar. Return codes
are ignored with this exit.
In order to use the full licensed version of the Xess spreadsheet along with
the integrated NX/XESS customized applications, you must do the following
prior to invoking NX:
1) Set the UGII_SPREADSHEET variable in the .ugii_env file to point to the
directory which includes the 'xess4' binary executable.
2) Set the environment variable, XESS_FULL, to anything (e.g. setenv XESS_FULL 1).

Internal

Finish Updating Spreadsheet

The finish updating spreadsheet exit occurs at the completion of
updating expressions. You must be in the modeling application.

Return Code/Description

1 Perform a spreadsheet recalc after returning from the user
exit.

n No spreadsheet recalc. "n" is any other return code except 1

Internal

Update Spreadsheet

The update spreadsheet user exit occurs at the start of updating
expressions into the NX part file. You must be in the modeling
application. First, you need to call Tools->Spreadsheet and
then, in the Spreadsheet menu call Tools->Extract Expr in
order to have some expressions. The interactive entry point is
Tools->Update Part.

Internal

NX Startup

The NX startup user exit occurs when you invoke NX. There are
no return codes for this option. If the user exit exists, your routine
executes. if the user exit does not exist, then NX starts as it
normally would.

Internal

Save Part As

The save part user exit occurs after the File->Save As... menu.

When the mode is Design in Context and the work part to save is not
the displayed part, then for each level of the assembly that contains
the work part, the full file specification of the current part name is
passed as the string parameter (param) to the user exit. This enables
you to identify which part is to be "saved as"


If no User Function program error occurs and an active part exists, the
next interactive step is is determined by the return code as follows:

Return Code/Description

1 Gateway menu. Control passes back to the Gateway menu after going
through the warnings and clean up routines of the normal NX dialogs
if required.

2 Choose part name file selection dialog with the string (from param)
as the default. For Design in Context, control passes to the normal
NX dialogs for each level of the assembly above the work part
(occurrence in an assembly tree) but with a default string for the
new part name as specified by the string from param.

n File->Save As dialog with no default string. n not equal to 1 or 2.
For Design in Context, control passes to the normal NX dialogs
for each level of the assembly above the work part (occurrence
in an assembly tree).

Internal

User Defined Symbols

The user defined symbols user exit occurs after the
Application->Drafting->Create->User Defined Symbols menu. There are no
return codes for this option. If the user exit exists, your routine
executes and then the User Defined Symbol dialog displays. if the user
exit does not exist, the User Defined Symbol dialog displays.

Internal

User Function

The execute User Function user exit occurs after the File->Execute->User
Function menu.

The next interactive step is determined by the return code as follows:

Return Code/Description

1 Runs the User Function program using the string passed from param.
The Motif file dialog is not displayed.

2 Disables the Execute User Function option. The system adminstrator
has the option of making this option (and the use of a User
Function license) unavailable.

Internal

Component Where-Used

The component where-used user exit occurs after the
Assemblies->Reports->Where Used menu and before the select components
dialog.

If no User Function program error is returned and no active part exists,
the file menu displays.

If an active part exists, the next interactive step is determined by the
return code as follows:

Return Code/Description

1 Assemblies->Reports->Where Used dialog with displayed part name as
default.

2 Assemblies->Reports->Where Used dialog with the string (from param)
as the default component name.

3 Assemblies->Reports->Where Used dialog with the string (from param)
as the default directory path name.

n Assemblies->Reports->Where Used dialog with no default string. "n"
is any other code exept 1, 2, or 3.

Internal