molding warpage

ViewMold Co Ltd is an ISO 9001:2000 certified plastic injection molds company that supplies
plastic injection molds
plastic injection molds design
plastic injection molds manufacturing of high quality,plastic injection molding... We are Proud to bring to you the quality and speed you would expect from Viewmold plastic injection molds. We believe we will be your supplier of choice. Just give Viewmold a email or submit a quote online. Our team of quote specialists is the most responsive and the most hands on.

Injection Molding defect:molding warpage

Solving molding warpage problems

Definition
Warpage occurs when there are variations of internal stresses in the material caused by a variation in shrinkage. Warped parts may not be functional or visually acceptable.

Causes
Non-uniform cooling
Temperature differences from one side of the mold to the other can lead to layers freezing and shrinking at different times and generating internal stresses.
Inconsistent shrinkage
Resulting from: a) Material variations such as property variations, varying moisture content, inconsistent melt and pigmentation; b) Process conditions variations such as inconsistent packing and varying mold and melt temperatures; c) Machine variations such as a damaged check ring and unstable controller.
(Animations not available More...) molding warpage

Remedies
Minimize differential shrinkage
Minimize orientation effects
Position gates for uni-directional flow, and modify part thickness.
Change part geometry
Add features such as stiffening ribs to the design. Alter part design to avoid thick sections and reduce the thickness of any features that intersect with the main surface.
Use thinner wall sections with ribs
Thicken only those wall sections that require extra material for structural stability and that cannot be strengthened using another method.
Change material
Semi-crystalline have naturally higher shrinkage and hence are more prone to warpage.
Solving one problem can often introduce other problems to the injection molding process. Each option hence requires consideration of all relevant aspects of the mold design specification.


Copyright 2006 www.ViewMold.com All Rights Reserved.