ViewMold Co Ltd is an ISO 9001:2000 certified plastic injection molds company that supplies
plastic injection molds
plastic injection molds design
plastic injection molds manufacturing of high quality,plastic injection molding...
We are Proud to bring to you the quality and speed you would expect from Viewmold plastic injection molds. We believe we will be your supplier of choice. Just give Viewmold a
email or
submit a quote online.
Our team of quote specialists is the most responsive and the most hands on.
Section 7: Standard Mold Components
Defines standard component types and suppliers
1) All mold components will be purchased through DME, Progressive, PCS, Parker, Balluff, and National only as listed by type below. Standard components will NOT BE ALTERED as supplied from the Vendor without special instructions for and documentation to the Customer.
2) Standard mold component types are as follows:
-Leader pins--------------------------------DME “GL” type (hardened and precision ground) or Class “S” Thomson Shafting
] -Bushings-----------------------------------DME “LBB” type (bronze plated and precision ground)
-Guided ejection leader pins-------------DME “PF” or “GL” type or Class “S” Thomson Shafting
-Guided ejection bushings--------------- DME “GEB” type (bronze plated and precision ground)
-Locating rings-----------------------------DME “6521” OR “6522” (VARIABLE DEPENDING ON MOLD DESIGN)
-Sprue bushings----------------------------DME “B” or “U” series
-Three plate bushings----------------------DME “TEB” type
-Wear Plates--------------------------------DME “WPB” type (bronze plated)
-Angle pins--------------------------------- DME “APD” type, MDE “EX” ejector pins, or Class “S” Thomson Shafting, or DME “GL” type leader pins
-Mold and Die springs-------------------- DME / Raymond type (blue, red, gold)
-Parting line locks------------------------- Progressive Top Lock “TL” type
-Bar locks-----------------------------------DME tapered interlocks (rectangular)
-PKO extensions----------------------------Progressive Hex series or puck style
-Recycling and mold dating inserts------DME, PCS, or Progressive
-Ejector pins--------------------------------DME “EX” type
-Ejector sleeves-----------------------------DME “S” type
-Ejector Blades------------------------------National “Shank and Blade” type
-Air poppet valves--------------------------National or PCS
-Accelerated ejectors-----------------------PCS / Cumsa (patented, round) type
-Stop buttons---------------------------------PCS “SP” type
-Hydraulic Cylinders-----------------------Parker series 2H
-Limit switches (ejector plates)-----------DME “Thinswitch”
-Limit Switches (cylinder)-----------------Parker “EPS” style (mounted directly to cylinder)
-Limit Switches (other)--------------------Balluff Series F 60 Mechanical
3) Off-set (“zero”) Corners on all mold plates will have a .50” x 45-degree chamfer along the entire edge.
4) One leader pin and one return on off-set corner are to be off-set a minimum of 0.125” to 0.25” to prevent rotation of mold plates during assembly/disassembly.